White Industries ENO Eccentric rear hub 130 mm fixed / free

Who could have known that the change to fixed gear or single speed could be so easy. The White Industries Eccentric ENO rear hub terminates in a frame in an offset position.

As soon as the hub is in the frame, the hub rotates back and tensions the chain. It's that simple. The 7.5 mm enable adjustable bolts axle nuts 15 mm with a rotation of 180-degree

White Industries ENO eccentric hubs are specially designed for bicycles with a vertical base.
With the eccentric rear hub, the rider can adjust the chain tension by just the elliptical shaft up and down in turn to the base. As the hub rotates back, the chain is pulled in tension. The ENO Eccentric is a flip / flop design fixed / free.

Note, for the fixed gear side, you need a jagged White Industries gear. Which you can fix it with a standard lock ring with British thread. For the freewheel side meets a standard free-wheel with BSA thread.

- Eccentric ENO
- Shell - 6061-T6
- axis - solid aluminum
- Bearings - two: 6902-2rs
- Freewheel 1:37 x 24 tpi freewheel wire
- Flange diameter 48 mm Designs - Center center flange: 32.5 mm